Bronze Thru

Bronze Thru

9 Steps to Casting a Bronze Sculpture

I have often wondered how a bronze sculpture is made. Unlike Michelangelo's statue of David, which is made of marble, you cannot carve bronze. But you do carve or create your sculpture in other material and then cast it in bronze. This takes multiple steps, and you have to make a mold without ruining the original. Here are the basics of the process, in 9 simple to understand steps.

• A sculpture has to be made out of clay. This can be done, like David, by carving the piece out of the clay. Or it can be done, like pottery, where the clay built up and formed. Each sculptor creates work that is unique. The clay sculpture is sent to the foundry so that an exact replica can be made in bronze.
• The first thing they do at the foundry is make a mold of the outside of the sculpture. This is done by applying multiple layers of liquid rubber over the clay which creates a flexible mold. The rubber is then coated in liquid fiberglass, which will harden into a supportive shell.
• Once the fiberglass hardens, it is carefully removed from the sculpture, usually in two or four main pieces. The fiberglass mold is then put back together and turned upside down. So, you think, simple, just fill with molten bronze and you're done. But bronze is hot, so a mold out of a different material is needed. To do this, you start by filling the fiber glass mold with melted wax. This is called wax casting.
• The next step is gating. The fiberglass and rubber molds are gently removed from the wax mold, leaving an exact wax replica of the clay sculpture. Wax rods, called gates, are attached to the sculpture. These gates will create channels in the final mold, which allows for the molten bronze to be poured into the mold.
• The wax replica is then dipped into a vat of ceramic slurry. As the vat vibrates, there is a build up of ceramic that will be the final mold for the bronze. So, why don't we just dip the original clay sculpture in the ceramic slurry? One, because the original needs to be handled very carefully, you do not want it damaged. If something happens to the wax mold, you can go back to the original and start again. Second, the channels need to be created for pouring the bronze into the mold.
• The burnout step is removing the wax from the mold. Since you want the mold to have a bottom, you leave the bottom of the mold in tact and just expose the ends of the gate channels. When the ceramic mold is placed into a kiln to cure, the wax melts and runs out of the channels, this leaves the inside hollow, ready for the bronze.
• Bronze pellets are melted at 2200 degrees Fahrenheit. The molten bronze is poured into the ceramic mold.
• Once the bronze cools, the ceramic shell is broken and the gates are sawn off.
• The sculpture is then ready for the finish work. The gate stubs are removed along with any other casting marks. If desired, a patina is applied to color the bronze. A final transparent coat of wax is then applied to protect the finished sculpture.

For an original piece of art with a limited number of pieces, the process is repeated for each individual piece. The specific number of the piece, such as 5/25 (meaning the 5th piece made out of a limited edition total of 25), is often etched into the wax before it is dipped. That way the number will appear on the bottom of the finished bronze.

So the next time you see a bronze sculpture, you can appreciate it more because you know how much work went into creating that wonderful piece of art. It took a lot of time, patience and love.

About the Author

Art galleries feature a variety of bronze sculptures. From whimsical animal and fruit sculptures, to moving pieces that represent the best of the human spirit, you will find a bronze that speaks to you.

Thru $10.49 Thru

Garmin Access, Xdcr, 200/50 Bronze Thru. Each $170.64 Manufacturer: Garmin. Each. Customers also search for: Discount Access, Xdcr, 200/50 Bronze Thru, Buy Access, Xdcr, 200/50 Bronze Thru, Wholesale Access, Xdcr, 200/50 Bronze Thru, 753759074326, 010-10182-01, GPS Mounting Supplies

Furuno Bronze Thru-Hull Transducer, 600w - 10-Pin $250 Bronze Thru-Hull Transducer, 600w - 10-Pin - 600 Watts 50/200 kHz 46/10 degree Beam Angles Bronze Thru-Hull 8-Meter Cable with 10-Pin Connector.

RayMarine M78918 Bronze Thru Long Stem Triducer $194.99 "Raymarine Bronze Long Stem Thru-Hull Transducer Brand New Includes Two Year Warranty, The Raymarine M78918 is a bronze long stem thru-hull transducer for ST30 and ST60 instruments. M78918 Features: Thru-hull Transducer, Part Number: M78918, For Raymarine Models: ST30 & ST60 Instruments"

Navico B258 Bronze Thru Hull $799 NAVICO B258 BRONZE THRU HULL 50/200 KHZ D/T W/HS FBB258 Bronze Thru HullThe B258 is 25 times more sensitive than a single-element50/200 kHz transducer. This innovative 1 kW transducermakes 600 W fishfinders perform like their more powerful bigbrothers-especially at 50 kHz. How does it do it? The B25

Garmin / Garmin Airmar B117 200/50kHz Bronze Thru-Hull Transducer / 010-10182-01 $157.95 Garmin - Garmin Airmar B117 200/50kHz Bronze Thru-Hull Transducer - 010-10182-01

Hummingbird / Humminbird XTH-9-20 Bronze Thru-Hull Transducer - 83/200 kHz / 710166-1 $136.41 Hummingbird - Humminbird XTH-9-20 Bronze Thru-Hull Transducer - 83/200 kHz - 710166-1

Lowrance 000-10364-001 Bronze StructureScan Thru Hull Transducer $528.95 "Lowrance Bronze Thru Hull Transducer For LSS-1 Sonar Brand New Includes One Year Warranty, The Lowrance 000-10364-001 is a bronze thru-hull transducer for LSS-1 sonar. This transducers provides with the same technology of left/right side scan and down scan imaging as the transom mount transducer in a thru-hull configuration. It will include fairing blocks that can be cut to fit the rise angle of the hull. Along with the Lowrance transducers you will need LSS-1 StructureScan Box module. 000-10364-001 Features: Product # 000-10364-001, Thru Hull Transducer, Left / Right SideScan&trade & Downscan Imaging&trade Technology, Fairing Block Included, For Lowrance Models : LSS-1 Sonar"

Furuno Bronze Thru-Hull Transducer W/ Temp, 600w - 8-Pin $175 Bronze Thru-Hull Transducer w/ Temp, 600w - 8-Pin - 600 Watts 50/200 kHz 45/15 degree Beam Angles Bronze Thru-Hull with Temperature 30 Foot Cable with 8-Pin Connector.

Garmin 010-10703-00 Bronze, Thru-hull Mount Transducer $679.95 "Garmin Bronze Thru-Hull Mount Transducer (010-10703-00) Brand New Includes One Year Warranty, The Garmin 010-10703-00 is a bronze thru-hull mount transducer that compute temperature data. This mount transducer operates at a frequency of 200 and 50 kHz, and beamwidth of 5 degrees and 21 degrees. 010-10703-00 Features: Bronze Thru-Hull Mount Transducer, Provides Temp Data, Operating Frequency of 200 & 50 kHz, Beamwidth of: -5 Degrees -21 Degrees, 12 M Cable, For Garmin GPS Models: GPSMAP: 525/525s, 526/526s, 535/535s, 545/545s, 546/546s, 720/720s, 740/740s, GSD: 22"

Garmin 010-10182-21 Bronze Thru-hull Transducer $197.95 "Garmin B117 Bronze Thru-Hull Depth/Temp for GSD-24 & GSD-26 (010-10182-21) Brand New Includes One Year Warranty, The Garmin 010-10182-21 is a B117 bronze thru-hull transducer (8-pin) that provides depth and temperature data. It has an operating frequency of 50 or 200 kHz and mounts on a 0-7&deg deadrise angle. This transducer provides accurate depth and temperature readings. 010-10182-21 Features: Bronze Thru-Hull Mount Transducer (8-pin), Provides Depth & Temp Data, Operating Frequency 200 & 50 kHz, Mounts On 0-7&deg Deadrise Angle, Includes Mounting Hardware & Installation Instructions, For Garmin GPS Models: GSD&trade 24, 26"

Garmin Single Frequency Bronze Thru-hull Mount Transducer with Depth and Temperature $149.99 Garmin 200KHz, 12deg, bronze, thru-hull mount transducerBronze, thru-hull mount transducer with depth and temp. Operating frequency of 200 kHz. Beamwidth of 12 degrees. Transducer kit comes with installation instructions.

Lowrance 136-00 Navico B258 Bronze Thru Hull $787.95 "Lowrance Navico B258 Bronze Thru Hull Brand New Includes Two Year Warranty, Product # 136-00 The Lowrance 136-00 is a B258 bronze thru hull transducer featuring unique ceramic-element construction. It provides deep water sounding with superb target and bottom definition. This transducer comes with a faring block. 136-00 Features: Dual Frequency Transducer, 1 kW RMS Power, High Speed Fairing Block, Operating Frequency of 50/200 kHz, Provides Depth & Temp Data, High-Performance, Bronze Housing, 7-Pin Blue Connector, 10 Meter Cable Attached, For Lowrance Models: HDS Series & Simrad NSE Series Multifunction Display Units"

Garmin 010-10640-20 Bronze Thru-hull Transducer $1014.95 "Garmin B260 1kW Bronze Thru-Hull Depth/Temp with FB for GSD-24 & GSD-26 (010-10640-20) Brand New Includes One Year Warranty, The Garmin 010-10640-20 is an Airmar 1kW B260 200/50kHz Bronze Thru-hull Transducer (8-pin) with fairing that provides depth and temperature data. It has an operating frequency of 50 or 200 kHz and mounts on a 0-22&deg deadrise angle. This transducer provides accurate depth and temperature readings and assists in greatly improved high-speed performance. 010-10640-20 Features: Bronze Thru-hull Transducer w/ Fairing, Provides Depth & Temp Data, Operating Frequency 50 & 200 kHz, Mounts On 0-22&deg Deadrise Angle, Accurate Depth & Temperature Readings, Includes Installation Instructions, For Garmin GPS Models: GSD&trade 24, 26"

RayMarine A26043 Raymarine B744V Bronze Thru Hull Triducer with 45' ca $396.95 "Raymarine B744V Bronze Thru Hull Triducer with 45' cable Brand New Includes Two Year Warranty, The Raymarine A26043 is a B744V bronze thru hull transducer with 45' cable for use with the Raymarine equipments. A26043 Features: B744V Bronze Thru Hull Triducer, Part Number: A26043, Frequency 200 kHz, Cable Length 45 ft, 2"" Hole diameter for Installation, For Raymarine Models: ST70, ST60, ST290"

Lowrance 106-82 Navico B260 Bronze Thru Hull $1075.95 "Lowrance Navico B260 Bronze Thru Hull Transducer Brand New Includes Two Year Warranty, Product # 106-82 The Lowrance 106-82 is a HP-DFBL260 Thru-hull-mount dual frequency transducer to be used with the Lowrance sonar units. It features bronze housing and high-power multiple elements . 106-82 Features: Dual Frequency Transducer, 1 kW RMS Power, High Speed Fairing Block, Operating Frequency of 50/200 KHz, 10m Cable Length, Bronze Housing, Provides Depth & Temp Data, 7-Pin Blue Connector, For Lowrance Models: HDS: 10, 5, 5x, 7, 8, LCX: 110C, 111C HD, 112C, 113C HD, 17M, 20C, 25C, 26C HD, 27C, 28C HD, 37C, 38C HD, LMS: 330C, 480"

Garmin 010-10982-20 Bronze Thru-hull Transducer $244.95 "Garmin B60 600W Tilted Element 20&deg for GSD-24 (010-10982-20) Brand New Includes One Year Warranty, The Garmin 010-10982-20 is a bronze thru-hull mount transducer with 20 degree tilt element that provides depth and temperature data. This element is tilted inside the housing that provides built-in deadrise compensation. The transducer provides accurate depth readings and has an operating frequency of 50 or 200 kHz. It is designed for 16 degree to 24 degree deadrise angle . 010-10982-20 Features: Bronze Thru-hull Mount Transducer, Provides Depth & Temp Data, Beamwidth Of 20&deg, Better Depth Readings, More Accurate Fish Detection, Mounts On 16-24&deg Deadrise Angle, Operating Frequency of 50 & 200 kHz, For Garmin GPS Models: GSD&trade 24"

Garmin 010-10982-21 Bronze Thru-hull Transducer $244.95 "Garmin B60 600W Tilted Element 12&deg for GSD-24 (010-10982-21) Brand New Includes One Year Warranty, The Garmin 010-10982-21 is a bronze thru-hull mount transducer with 12 degree tilt element that provides depth and temperature data. This element is tilted inside the housing that provides built-in deadrise compensation. The transducer provides accurate depth readings and has an operating frequency of 50 or 200 kHz. It is designed for 8 degree to 15 degree deadrise angle . 010-10982-21 Features: Bronze Thru-hull Mount Transducer, Provides Depth & Temp Data, Beamwidth Of 12&deg, Better Depth Readings, More Accurate Fish Detection, Mounts On 8-15&deg Deadrise Angle, Operating Frequency of 50 & 200 kHz, For Garmin GPS Models: GSD&trade 24"

Garmin 010-10703-20 Bronze Thru-hull Transducer $662.95 "Garmin B258 1kW Bronze Thru-Hull Depth/Temp with FB for GSD-24 & GSD-26 (010-10703-20) Brand New Includes One Year Warranty, The Garmin 010-10703-20 is an airmar 1kW B258 200/50kHz bronze thru-hull transducer with fairing that provides depth and temperature data. This transducer leads to a much clearer picture and the ability to reach deeper depths. It has an operating frequency of 50 or 200 kHz and mounts on a 0-25&deg deadrise angle. This transducer provides accurate depth and temperature readings and helps in greatly improved high-speed performance. 010-10703-20 Features: Plastic In-hull Transducer (8-pin), Provides Depth & Temperature Data, Operating Frequency 50 & 200 kHz, Mounts On 0-25&deg Deadrise Angle, Provides Accurate Depth Readings, Includes Installation Instructions, For Garmin GPS Models: GSD&trade 24, 26"

Garmin Dual Frequency Bronze Thru-hull Mount Transducer with Depth $160.99 Garmin 200/50KHz, 12/45deg, bronze, thru-hull mount transducerBronze, thru-hull mount transducer with depth. Operating frequency of 200 and 50 kHz. Beamwidth of 12 degrees at 200 kHz, 45 degrees at 50 kHz. Transducer kit comes with installation instructions.

Navico B744V Bronze Thru Hull Transducer $379.95 NAVICO B744V BRONZE THRU HULL 50/200KHZ TRI W/FAIRING BLOCKOur Triducer multisensor model features depth, speed, and temperature in a single housing-drill only one hole in a boat! The 50/200 kHz dual frequency, single ceramic element provides good target detail in shallow water at 200 kHz and good d

Garmin 1kW B260 Bronze Thru-Hull Transducer with Fairing for GSD 22 $902.7 1kW thru-hull, B260 Bronze, w/ID, w/fairing. Operating frequency of 200 and 50 kHz. Beamwidth of 6 degrees at 200 kHz, 19 degrees at 50 kHz.

RayMarine A80010 Bronze Thru Hull w/ Temp $1453.95 "Raymarine B265LH 1kW Bronze Thru Hull w/Temp Brand New Includes Two Year Warranty, The Raymarine A80010 is a B265LH bronze through hull transducer with temperature. The 600 watt Raymarine through hull transducer is compatible with wood and fiberglass hull material. Raymarine A80010 features a self-sealing removable paddle wheel assembly along with a 30 ft long cable with connector. A80010 Features: Through Hull Transducer, Part Number: A80010, Frequency 200/50 kHz, 600 Watts of Max Power, Suitable w/ Wood & Fiberglass, Self-Sealing Removable Paddle Wheel Assembly, Speed & Temperature Transducer, Includes 30ft Cable w/ Connector, 2"" Hole Diameter"

Garmin 010-10983-00 Bronze, thru-hull w/ fairing, Depth & Temp, AIRMA $172.95 "Garmin Thru-Hull / Narrow Stem Transducer w/ Fairing (010-10983-00) Brand New Includes One Year Warranty, The Garmin 010-10983-00 is an Airmar B45 narrow stem bronze thru hull with fairing and comapatible with all Garmin dual frequency sonar units. 010-10983-00 Features: Bronze Thru Hull, Provides Depth & Temp Data, Operating Frequency of 200 & 50 kHz, Beamwidth of -12 Degrees at 200kHz -45 Degrees at 50kHz, Maximum Depth of 1200 Ft, 12 M Cable, For Garmin GPS Models: GPSMAP: 421/421s, 431/431s, 441/441s, 521/521s, 526/526s, 531/531s, 536/536s, 541/541s, 546/546s, 720/720s, 740/740s"

Perko / Perko 1-1/4" Thru-Hull Fitting f/ Hose Chrome Plated Bronze Made in the USA / 0350007DPC $52.34 Perko - Perko 1-1/4" Thru-Hull Fitting f/ Hose Chrome Plated Bronze Made in the USA - 0350007DPC

Perko / Perko 1-1/4" Thru-Hull Fitting f/Hose Bronze MADE IN THE USA / 0350007DPP $45.05 Perko - Perko 1-1/4" Thru-Hull Fitting f/Hose Bronze MADE IN THE USA - 0350007DPP

Perko / Perko 1-1/2" Thru-Hull Fitting f/ Hose Chrome Plated Bronze Made in the USA / 0350008DPC $59.22 Perko - Perko 1-1/2" Thru-Hull Fitting f/ Hose Chrome Plated Bronze Made in the USA - 0350008DPC

Perko / Perko 1/2" Thru-Hull Fitting w/Pipe Thread Bronze MADE IN THE USA / 0322DP4PLB $30.04 Perko - Perko 1/2" Thru-Hull Fitting w/Pipe Thread Bronze MADE IN THE USA - 0322DP4PLB

Perko / Perko 1-1/4" Thru-Hull Fitting w/Pipe Thread Bronze MADE IN THE USA / 0322DP7PLB $53 Perko - Perko 1-1/4" Thru-Hull Fitting w/Pipe Thread Bronze MADE IN THE USA - 0322DP7PLB

Perko / Perko 3/4" Thru-Hull Fitting f/ Hose Bronze MADE IN THE USA / 0350005DPP $34.81 Perko - Perko 3/4" Thru-Hull Fitting f/ Hose Bronze MADE IN THE USA - 0350005DPP

Perko / Perko 1" Thru-Hull Fitting f/Hose Bronze MADE IN THE USA / 0350006DPP $42.77 Perko - Perko 1" Thru-Hull Fitting f/Hose Bronze MADE IN THE USA - 0350006DPP

Garmin / Garmin 200/50kHz, 12/45Deg, Bronze Thru-Hull Mount Transducer w/ Depth, Temp, & Speed / 010-10183-02 $241.04 Garmin - Garmin 200/50kHz, 12/45Deg, Bronze Thru-Hull Mount Transducer w/ Depth, Temp, & Speed - 010-10183-02

Perko / Perko 1-1/8" Thru-Hull Fitting f/ Hose Bronze Made in the USA / 035006ADPP $42.77 Perko - Perko 1-1/8" Thru-Hull Fitting f/ Hose Bronze Made in the USA - 035006ADPP

Perko / Perko 3/8" Thru-Hull Fitting w/Pipe Thread Bronze MADE IN THE USA / 0322DP3PLB $28.78 Perko - Perko 3/8" Thru-Hull Fitting w/Pipe Thread Bronze MADE IN THE USA - 0322DP3PLB

Perko / Perko 5/8" Thru-Hull Fitting f/ Hose Chrome Plated Bronze MADE IN THE USA / 0350004DPC $30.29 Perko - Perko 5/8" Thru-Hull Fitting f/ Hose Chrome Plated Bronze MADE IN THE USA - 0350004DPC

Furuno / Furuno 525ST-MSD Bronze Thru-Hull Multisensor w/ High-Speed Fairing Block, 600w (10-Pin) / 525STID-MSD $305.46 Furuno - Furuno 525ST-MSD Bronze Thru-Hull Multisensor w/ High-Speed Fairing Block, 600w (10-Pin) - 525STID-MSD

Perko / Perko 1-1/2" Thru-Hull Fitting f/ Hose Bronze Made in the USA / 0350008DPP $55.12 Perko - Perko 1-1/2" Thru-Hull Fitting f/ Hose Bronze Made in the USA - 0350008DPP

Perko / Perko 1-1/8" Thru-Hull Fitting f/ Hose Chrome Plated Bronze Made in the USA / 035006ADPC $46.79 Perko - Perko 1-1/8" Thru-Hull Fitting f/ Hose Chrome Plated Bronze Made in the USA - 035006ADPC

Garmin 200/50kHz 12/45Deg Bronze Thru-Hull Mount Transducer w/ Depth Temp & Speed 0101018302 $263.36 Garmin 200/50kHz 12/45Deg Bronze Thru-Hull Mount Transducer w/ Depth Temp & Speed 0101018302

Garmin 200/50kHz 12/45Deg Bronze Thru-Hull Mount/Long Stem Transducer w/ Depth Temp and Speed 0101019302 $446.49 Garmin 200/50kHz 12/45Deg Bronze Thru-Hull Mount/Long Stem Transducer w/ Depth Temp and Speed 0101019302