Mount Kit Lowrance
Mount Kit Lowrance
![]() |
![]() LOWRANCE FM 12 FLUSH MOUNT KIT US $20.99
|
![]() LOWRANCE FM 6 IN DASH BOAT MOUNTING KIT US $19.95
|
DIY Marine Electronics: Installing a Fishfinder
A big factor in buying a fishfinder is deciding whether to install it yourself or pay someone to do it for you. If you have never installed a fishfinder before this article will give you an overview of the general process. It is not intended to be a step by step guide for any particular fishfinder but it will give you an idea of whether or not you have the right skills to tackle the installation yourself.
Getting Started:
You can purchase fishfinder installation kits or assemble the components yourself using off the shelf products. The kit usually comes with some or all of the following components:
- A rubber grommet or water seal (for feeding the wiring from the transducer to the fishfinder display unit)
- Some extra wire
- A waterproof battery pack and battery pack bag
- A foam block (for mounting the transducer in the boat)
- A heavy duty marine sealant such as Marine Goop or Lexel
Your fishfinder unit may or may not come with an installation kit, but at the very minimum should contain:
- Fishfinder display unit
- A ram mount and mounting bracket (to attach the fishfinder display unit to the boat)
- Transducer and power cable
1. Mounting the Fishfinder Display unit
Determine where you will mount the fishfinder. Choose a location that makes it easy to reach while navigating the boat, and out of the way of any obstructions. Some installation mounts have back brackets which must be screwed on for stability. This type of mount requires you have access to the part of the boat underneath the mount so you can tighten the screws. You will need to drill holes for the mount and attach it securely. You can then insert the ram mount and fishfinder unit.
2. Installing the fishfinder transducer
There is more than one way to do this and it depends on your preference and on the type of fishfinder you purchased. Mounting a transducer inside the bottom of the boat involves cutting out a hole in a foam block designed to cushion the transducer. You attach the foam block using a good quality sealant and then insert the transducer in the foam block. The sealant must be applied carefully avoiding gaps and bubbles for the transducer to work correctly. An outside mount may require drilling a hole in the boat. You can use a rubber grommet or a waterseal and plenty of sealant to make the hole watertight. Alternatively you can mount the transducer on the the hull, at a point high enough to be in the water but out of the way of rocks or obstacles.
3. Wiring up the Fishfinder to the Transducer.
This step involves routing the power cable from the transducer to the fish finder display unit and may involve drilling another hole to keep the installation neat and tidy. Again, a grommet or waterseal may be needed.
4. The last step is wiring up the unit to the battery pack.
You may need to add additional lengths of wire depending on where you plan to stash the battery pack, the size of your boat etc. The batteries must be sealed in a waterproof container, such as a waterproof battery pack bag.
These are the basic steps required for installing a fishfinder. After you follow the four steps above, you can tidy up any loose wires with tie wraps and tuck them out of site. If you are handy with a drill and pair of wire crimpers it is easy enough to do but if the idea of drilling holes in your boat and crimping battery wires doesn't thrill you it is well worth paying someone to install your fishfinder for you.
About the Author
Want to learn more about top-quality fishfinder? MarineWholesales.com has all the leading brands of discount marine electronics for yachting, boating and fishing.
|
|
Lowrance 113-03 Flush Mount Kit $35.95 "Lowrance FM-4 Flush Mount Kit, Product # 113-03 The Lowrance 113-03 is a flush mount kit to mount compatible devices. 113-03 Features: Flush Mount Kit, For Lowrance Models: SeaFinder: 240DF, Trifinder: 2, X51, X52, X59DF" |
|
|
Lowrance 10028-001 Elite/Mark Flush Mount Kit 5 FM-ME5 $39.95 "Lowrance FM-ME5 Flush Mount Kit, Product # 10028-001 The Lowrance 10028-001 is a Mark-5 and Elite-5 flush-mount kit for 5"" models for use with Elite-5, Elite-5m, Elite-5x, Mark-5x, Mark-5x Pro. 10028-001 Features: Lowrance Flush Mount Kit, For Lowrance Models: Elite: 5, 5m, 5x, Mark 5x, 5x Pro" |
|
|
Lowrance 113-04 Lowrance FM-5 113-04 $59.95 "Lowrance FM-5 Flush Mount Kit, Product # 113-04 The Lowrance 113-04 is a flush mount kit to mount compatible devices. 113-04 Features: Flush Mount Kit, For Lowrance Models: Cuda: 168 EX, FishEasy: 250 DS, FishElite: 320, 480, 500C, 640C, FishMark: 320, 480, 500C, 640C, GlobalMap: 3500C, 4800, IntelliMap: 480, 500C, LMS: 332C, 337C DF, 480, SeaCharter: 480DF, 500C DF, SeaFinder: 640C DF, X102C, X107C DF, X125, X126DF, X135, X136DF, X47EX, X-86 DS, X96" |
|
|
Lowrance 113-20 FM-6 Flush Mount Kit $32.95 "Lowrance FM-6 Flush Mount Kit, Product # 113-20 The Lowrance 113-20 is a FM-6 flush-mount kit for use with the Cuda 128, Cuda 168, Cuda 242, Cuda 250 S/Map, FishEasy 240, FishEasy 245 DS, FishEasy 320, SeaFinder 245DS, X47 and X-50 DS. 113-20 Features: Flush Mount Kit, For Lowrance Models: Cuda: 128, 168, 242, 250 S/Map, FishEasy: 240, 245 DS, 320, SeaFinder: 245DS, X Series: X-47, X-50 DS" |
|
|
Lowrance Elite/Mark Flush Mount Kit 5 FM-ME5 $19.56 LOWRANCE ELITE / MARK FLUSH MOUNT KIT 5" FM-ME5Mark-5 and Elite-5 flush-mount kit for 5" models.Works with: Elite-5, Elite-5m, Elite-5x, Mark-5x, Mark-5x Pro |
|
|
Lowrance 12465 Lowrance Flush Mount fHDS Series $33.94 Flush Mount Kit for all HDS units. |
|
|
Lowrance FM-5 Flushmount Kit for Marine Systems $42.95 Lowrance flush mount kit includes mounting brackets, template, screws and washers. Works with: Cuda 168 EX, FishElite 320, FishElite 480, FishElite 500C, FishMark 320, FishMark 480, FishMark 500C, GlobalMap 3500C, GlobalMap 4800, IntelliMap 480, IntelliMap 500C, LMS-332C, LMS-337C DF, LMS-480, SeaC |
|
|
Lowrance 113-88 Lowrance GPS Antenna Mount Base $38.95 "Lowrance GPS Antenna Mount Base, Product # 113-88 The Lowrance 113-88 is a GPS pole antenna mount base. 113-88 Features: GPS Antenna Mount Base" |
|
|
Lowrance X4 Fishfinder Portable with Transducer $208.04 Delivering the highperformance sonar anglers have come to expect from Lowrance the costefficient XSeries fishfinders feature a full 4inch Film SuperTwist LED display for easy viewing especially in direct sunlight with 4level gray scale definition for superior clarity and target definition. The Lowrance XSeries offers anglers single and dualfrequency performance options for a variety of fishing and boating conditions. Lowrance X4 Portable features the same sonar and display specifications at the Lowrance X4 but is packed with a softsided portable kit a Dcell battery holder (batteries not included) and a Skimmerr transducer with suction cup mount.The new performance XSeries models also feature innovative sonar technologies that make Lowrance fishfinders a favorite among anglers and boaters; including GRAYLINE for precision separation of fish from nearby structure and the bottom Advanced Signal Processing (ASP) that automatically adjusts sonar settings to provide anglers with best picture and FishTrack to display target depth readings above fish symbols. Ideal for fishfinding use anywhere the X4 Portable model sonar and screen features are identical to the X4 and comes with a softsided portable kit that includes a battery compartment and Skimmer transducer with suctioncup mount. All Xseries fishfinders are waterproof to the IPx7 standard and are protected by a oneyear limited warranty. Scheduled availability: November 2010. Product : LOWRANCE X4 FISHFINDER PORTABLE WITH TRANSDUCER. Manufacturer : LOWRANCE. Manufacturer Part No : 00010228001 |
|
|
Lowrance 000-10418-001 Lowrance 3G Broadband Radar Dome $1299 "Lowrance 3G Broadband Radar Dome Brand New Includes Two Year Warranty, Product # 000-10418-001 The Lowrance 000-10418-001 is the 3G Broadband Radar Dome for HDS systems. It features Broadband Radar&trade technology that facilitates crystal clear image of your immediate surroundings. It is easy to use for both experienced and novice navigators. It's the first radar with no radiation hazard. This unit gives great performance with its compact, dependable design, and works with Ethernet for onboard radar display sharing. 000-10418-001 Features: Digital Radar, Crystal Clear Images of Surroundings, No Radiation Hazard, InstantOn&trade w/ No Tuning Required, Low Power Draw, Safe to Mount Anywhere, Quick Installation, Unmatched Short-Range Detection, 10 MARPA Targets, Antenna Receiver Noise Figure 6 dB, Antenna Rotation Speed 24/36 rpm /- 10 RPM, Transmitter Frequency X-Band 9.3 - 9.4GHz, Transmitter Power Output 165mW Nominal, Power Supply 9 - 31.2vDC, 5.2° Horizontal / 25° Vertical Beamwidth, Included FREE: 33' (10m) Radar Cable, Mounting Kit Hardware, Installation Template, Owner's Manual" |
|
|
Lowrance 00010028001 Lowrance EliteMark Flush Mount Kit 5 .in FMME5 $33.27 Mark5 and Elite5 flushmount kit for 5 models.Works with: Elite5 Elite5m Elite5x Mark5x Mark5x Pro |
|
|
Lowrance 22-19 Lowrance LVR-250 DSC VHF Fixed-Mount Marine Radio $155.95 "Lowrance LVR-250 DSC VHF Fixed-Mount Marine Radio Brand New Includes Two Year Warranty, Product # 22-19 The Lowrance 22-19 LVR-250 fixed mount DSC VHF marine radio offers solid reliability and attractive features. It has 2.6 x 4.6 cm LCD channel display with backlighting function and 25 watts transmit power with 1 watt low power mode. The other features include 6 tactile microphone keys with WX key, powerful speaker, easy left or right handed control and 3 favorite channel mode with scan. The 22-19 has two modes one is dual and the other is TriWatch, the local and distant feature eliminates interference. Case and microphone are fully waterproof. 22-19 Features: LVR-250 DSC VHF Fixed-Mount Marine Radio, 25 Watts Transmit Power - 1 Watt Low Power Mode, LCD Channel Display - 1"" x 1.8"" (2.6 x 4.6 cm) Display - w/ backlighting Feature, DSC Class D/SC-101 Automatic Distress Operation, High Resolution Position Polling & Group Calling Via NMEA 0183, Immediate GPS Boat Position, Channel Naming, Weather Alert, 6 Tactile Microphone Keys w/ WX Key, Powerful Speaker, Rotary Channel Control, Super Large 16/9 Calling Channel Key, 3 Favorite Channel Mode w/ Scan, Local Distant Feature Eliminates Interference, Selectable Dual & TriWatch Modes, 3W External Speaker & GPS Interface Jacks, Fully Waterproof Case & Microphone, Included FREE: Flush Mount Kit, Dust Cover" |
|
|
Lowrance FM-12 Flush Mount Kit for All HDS Series $19.95 Flush Mount Kit for all HDS units. |
|
|
Lowrance 5152 Suction Cup Kit $36.95 "Lowrance Suction Cup Kit, Product # 5152 The Lowrance 5152 is a suction Cup bracket kit for portable use with the transducers. 5152 Features: Suction Cup Bracket Kit, For Lowrance Transducers Models: HS-WS, HS-WSBK, HS-WST, PT-WS PT-WSBK, PDT-WSU, PT-WSU, PTT-WSU" |
|
|
Lowrance 000-10606-001 Lowrance Kayak Scupper Transducer Mount $54.95 "Lowrance Kayak Scupper Transducer Mount Brand New Includes Two Year Warranty, The Lowrance 000-10606-001 is a Kayak Scupper transducer mount. Designed for most sit-on-top fishing kayaks on the market, the mount is easy to install and remove, in any scupper hole, requiring few tools and no messy adhesives common to existing kayak transducer mounts. It provides the simplest and most convenient transducer mounting system for Lowrance s top-selling fishfinders. This new scupper mount makes it easier for kayak anglers to take advantage of our best-in-class technology, and ensures they get the best performance returns from their transducer. 000-10606-001 Features: Kayak Scupper Transducer Mount, Dual Frequency Skimmer Type & 455/800 kHz DSI Transducer, Frequency 83/200 kHz, Easy To Install & Remove, Ensures Best Performance Returns, Built-in Temperature Sensor, For Lowrance Models: HDS®, Elite&trade, Mark&trade, X-Series&trade" |
|
|
Lowrance Transom Mount Transducer for DSI $69.95 LOWRANCE TRANSOM MOUNT DUCER FOR DSI WITH TEMPReplacement DSI skimmer transducer.Works with: Elite-5 DSI, Elite-5x DSI, Mark-5x DSI |
|
|
Lowrance 124-65 Lowrance Flush Mount for All HDS Series FM-13 $35.95 "Lowrance Flush Mount for All HDS Series FM-13, Product # 124-65 The Lowrance 124-65 is a FM-13 flush mount for all HDS series units. 124-65 Features: Flush Mount, Includes Paper Template & 4 Screws, For Lowrance Models: HDS: 10, 10m, 5, 5m, 5x, 7, 7m, 8, 8m" |
|
|
Lowrance LVR880 DSC VHF + FM Fixed Mount Marine Radio $297.84 LVR880 DSC VHF + FM Fixed Mount Marine RadioVHF with stereo FM radio receiver Exclusive TrackYourBuddy feature NAVIGATION to WAYPOINT with transfer capability to chartplotters 200 waypoints with up to 6 character alpha/numeric naming Full ClassD or SC101 automatic distress operation with highres position polling and group calling via NMEA 0183/NMEA 2000 output to chartplotters Channel naming S.A.M.E. weather alert for countrytocountry monitoring with NOAA Wx 1050Hz tone alert Simplified intercom with talkback plus builtin 22 w hailerhorn Large 2.24 (57 mm) speaker Instant GO and MOB key 3W external speaker jack All available USA Canadian International and 10 weather marine channel naming (country specific) Flushmount kit and dust cover included Product : LOWRANCE LVR880 VHF RADIO WATERPROOF Manufacturer : LOWRANCE Manufacturer Part No : 2220 UPC : |
|
|
Lowrance 124-69 Lowrance Network Starter Kit $68.95 "Lowrance Network Starter Kit, Product # 124-69 The Lowrance 124-69 is a Network Starter Kit for use with all Red network devices. 124-69 Features: Network Starter Kit, Two Terminating Resistors (TR-120M-RD, TR-120F-RD), Two T-connectors (N2K-T-RD), One 2'Extension Cable (N2KEXT-2RD), One 15'Extension Cable (N2KEXT-15RD), Power Node (N2K-PWR-RD), For Lowrance Models: GlobalMap: 5200C, 5300C iGPS, 7200C, 7300C HD, 8200C, 8300C HD, 9200C, 9300C HD, HDS: 10, 10m, 5, 5m, 5x, 7, 7m, 8, 8m, LCX: 112C, 113C HD, 37C, 38C HD, LMS: 520C, 522C iGPS, 525C DF" |
|
|
Lowrance Corporation Lowrance LMS Series Recording Sonar/GPS + Waas Trolling Motor Mount 200 Khz Transducer 10673 $68.12 Lowrance Corporation Lowrance LMS Series Recording Sonar/GPS + Waas Trolling Motor Mount 200 Khz Transducer 10673 |
|
|
Lowrance 22-20 Lowrance LVR-880 DSC VHF + FM Fixed Mount Marine Radio $208.95 "Lowrance LVR-880 DSC VHF FM Fixed Mount Marine Radio Brand New Includes Two Year Warranty, Product # 22-20 The Lowrance 22-20 LVR-880 FM Fixed Mount DSC VHF marine radio offers solid reliability and attractive features. It has 3 inch FSTN full matrix LCD display, including Digital Selective Calling (DSC) and FM radio reception. The other features include VHF with stereo FM radio receiver, exclusive ""Track-Your-Buddy"" feature, NAVIGATION to WAYPOINT with transfer capability to GPS Chartplotters and 200 waypoints with up to 6 character alpha/numeric naming. The 22-20 has a Full Class-D or SC-101 automatic distress operation with high resolution position polling and group calling via NMEA 0183/NMEA 2000 output. 22-20 Features: LVR-880 FM DSC VHF Fixed Mount Marine Radio, li 25 Watts Transmit Power - 1 Watt Low Power Mode, VHF w/ Stereo FM Radio Receiver, 3 Inch FSTN Full Matrix LCD Display, Navigation to Waypoint w/ Transfer Capability To GPS Chartplotters, 200 waypoints w/ Up To 6 Character Alpha Numeric Naming, Exclusive ""Track-Your-Buddy"" Feature, Automatic Distress Operation w/ High Resolution Position Polling, Channel Naming, Weather Alert For Country To Country Monitoring, Simplified Intercom w/ Talkback, Large 2.24"" Speaker, Instant ""GO"" & MOB key, 3W External Speaker Jack, Fully Waterproof Case & Microphone, Included FREE: Flush Mount Kit, Dust Cover" |
|
|
Lowrance 106-73 Lowrance PD-WBL 106-73 $79.95 "Lowrance PD-WBL Trolling Motor Mount Transducer Brand New Includes Two Year Warranty, Product # 106-73 The Lowrance 106-73 is a PD-WBL trolling motor mount transducer which can be used with all the Lowrance units with blue connector. 106-73 Features: Trolling Motor Mount Transducer, For Lowrance Models: LCX: 110C, 111C HD, 15CI, 15CT, 15MT, 16CI, 17M, 20C, 25C, 26C HD, LMS: 332C, 334C iGPS, X102C, X125, X135, X5" |
|
|
Lowrance 106-72 Lowrance HST-WSBL 106-72 $81.95 "Lowrance HST-WSBL Transom Mount Skimmer Transducer Brand New Includes Two Year Warranty, Product # 106-72 The Lowrance 106-72 is a HST-WSBL 200 kHz Transom Mount Skimmer Transducer. It features a built-in temperature sensor. 106-72 Features: Transom Mount Skimmer Transducer, Built-in Temperature Sensor, Frequencey 200 kHz, For Lowrance Models: LCX: 110C, 111C HD, 17M, 20C, 25C, 26C HD, LMS: 332C, 334C iGPS, 480, X102C, X125, X135, X52" |
|
|
Lowrance 106-71 Lowrance HS-WSBL Skimmer Transducer $79.95 "Lowrance HS-WSBL Skimmer Transducer Brand New Includes Two Year Warranty, Product # 106-71 The Lowrance 106-71 is a HS-WSBL 200 Khz Transom Mount skimmer transducer for use with the Lowrance marine equipments. 106-71 Features: Transom Mount Skimmer Transducer, For Lowrance Models: HDS: 10, 5, 5x, 7, 8, LCX: 110C, 111C HD, 112C, 113C HD, 17M, 20C, 25C, 26C HD, 27C, 28C HD, 37C, 38C HD, LMS: 330C, 332C, 334C iGPS, 480, 520C, 522C iGPS, X102C, X125, X135, X-510C, X52" |
|
|
Lowrance Transom Mount Transducer fDSI with Temp $107.42 Replacement DSI skimmer transducer.Works with: Elite5 DSI Elite5x DSI Mark5x DSI. Product : LOWRANCE TRANSOM MOUNT DUCER FOR DSI WITH TEMP. Manufacturer : LOWRANCE PARTS. Manufacturer Part No : 00010260001 |
|
|
Lowrance 11359 Mb-13 1-inch Ball Mount $49.95 "Lowrance MB-13 1"" Ball Mount, Product # 11359 The Lowrance 11359 is a MB-13 R-A-M 1"" ball mount bracket with arm and cradle, for use with the Lowrance marine equipments. It allows you to adjust the screen to best viewing angle. This bracket durably mounts to car, truck, or boat dash for on-the-go use. 11359 Features: Ball Mount Bracket, Pivoting Arm & Cradle, For Lowrance Models: iFINDER: GO, GO2" |
|
|
Lowrance SimNet To N2K Adapter Kit $99.95 LOWRANCE SIMNET TO N2K ADAPTER KITSimNet to N2K Adaptor Kit - Connect Simrad heading sensor (FC40, RC42) toNMEA 2000 network; includes Simnet-to-N2k male adaptor, Simnet-2 Joiner,T connector. |
|
|
Lowrance HDS-5 to PPP-18I Adapter Kit $53.95 Adapter for HDS-5 to PPP17/18I. Includes HDS-5 gimbal bracket, battery power cable, and transducer adaptor. This kit lets you add a PPP-18I Ice Fishing Pack to a Lowrance HDS-5 system. |
|
|
Lowrance Trolling Motor Mount Transducer $103.12 PDTWBLTrolling motormount pod type with builtin temperature sensor.Works with: LCX110C LCX111C HD LCX17M LCX20C LCX25C LCX26C HD LMS332C LMS334C iGPS LMS480 X102C X125 X135 X52Product : LOWRANCE PDTWBL TROLLING MOTOR T/M DUCER W/ TEMP Manufacturer : LOWRANCE PARTS Manufacturer Part No : 10674 UPC : 042194524061 |
|
|
Lowrance Transom Mount Skimmer Transducer $88.01 HSTWSBLTransommount skimmer with builtin temperature sensor.Works with: LCX110C LCX111C HD LCX17M LCX20C LCX25C LCX26C HD LMS332C LMS334C iGPS LMS480 X102C X125 X135 X52Product : LOWRANCE HSTWSBL 10672 Manufacturer : LOWRANCE PARTS Manufacturer Part No : 10672 UPC : 042194524047 |
|
|
Lowrance Trolling Motor Mount Transdcuer $88.38 PDWBLTrolling motormount or shootthruhull pod type transducer.Works with: LCX110C LCX111C HD LCX15CI LCX15CT LCX15MT LCX16CI LCX17M LCX20C LCX25C LCX26C HD LMS332C LMS334C iGPS X102C X125 X135 X5Product : LOWRANCE PDWBL TROLLING OR SHOOTTHRUHULL 20 DEGREE Manufacturer : LOWRANCE PARTS Manufacturer Part No : 10673 UPC : 042194524054 |
|
|
Lowrance 106-49 Lowrance HSt-50/200-WSU Dual Frequency Transom Mount T $112.95 "Lowrance HSt-50/200-WSU Dual Frequency Transom Mount Transducer w/ Temp Brand New Includes Two Year Warranty, The Lowrance 106-49 is a HST-50/200-WSU dual frequency Transom Mount Transducer with built in temperature sensor. 106-49 Features: Transom Mount Transducer, Dual Frequency Skimmer Type, Frequency 50/200 kHz, Built-in Temperature Sensor, Includes 25' Power Cable, For Lowrance Models: FishEasy: 320, M56 S/MAP, M68C S/MAP, SeaChamp: 1000C DF, 2000C DF, SeaCharter: 500C DF, 502C DF iGPS, 640C DF, 642C DF iGPS, SeaFinder: 240DF, 250DF, 320DF, 480DF, 500C DF, 640C DF, X67C" |
|
|
Lowrance Kayak Scupper Transducer Mount $39.95 Kayak Scupper Transducer MountLowrance's transducer mounting systems for sit-on-top fishing kayaks. The Transducer Kayak Scupper Mount is perfect for all HDS, Elite, Mark and X-Series Lowrance Skimmerr transducers, both 83/200 kHz and 455/800 kHz DownScan Imaging (DSI) models alike, as well as earli |
|
|
Lowrance RAM-B-107-1U-Lowrance RAM Mount Piranha Mount $43.95 "Lowrance RAM Mount X-4 Mount Brand New, The RAM-B-107-1U is a marine grade aluminum mount with a 2.5 inch diameter round base, 1 inch rubber ""B"" sized ball, standard sized length arm and mounting plate with 1 inch diameter rubber ball designed to hold large marine electronic devices. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. With a twist of the arm knob, you can move the marine mount to your optimum viewing position. RAM-B-107-1U Features: Universal Marine Electronic Mount, 1"" Rubber Ball Size, Marine Grade Aluminum Construction, For Lowrance Models: X-4, X-4 Pro" |
|
|
Lowrance 101-63 MB-8 1-1/2 Ball Mount Bracket $69.95 "Lowrance MB-8 1-1/2"" Ball Mount Bracket, Product # 101-63 The Lowrance 101-63 is a MB-8 RAM 1-1/2"" Ball Mount Bracket featuring long arm and mounting plate, for use with the Lowrance marine equipments. 101-63 Features: Ball Mount Bracket, Long Arm & Mounting Plate, For Lowrance Models: FishMark: 160, 240, GlobalMap: 1000, 2000, 2400, 3000, 4000M, 5000C, 6000C, 7000C, GlobalNav: II, IIA, LCX: 104C, 111C HD, 113C HD, 15CI, 15CT, 15MT, 16CI, 17M, 18C, 19C, 20C, 25C, 26C HD, 27C, 28C HD, 37C, 38C HD, LMS: 240, 350, 350A, X-70, X-70A, X-71, X-91" |
|
|
Lowrance X-4 Fishfinder 200kHz - Transom Mount Transducer $89.95 LOWRANCE X-4 FISHFINDER 200KHZ TRANSOM MOUNT TRANSDUCERDelivering the high-performance sonar anglers have come to expect from Lowrance, the cost-efficient X-Series fishfinders feature a full 4-inch Film SuperTwist LED display for easy viewing especially in direct sunlight, with 4-level gray scale de |
|
|
Lowrance 000-10346-001 Adapter Kit f/HDS-5 to PPP-18I $65.95 "Lowrance Adapter Kit f/HDS-5 to PPP-18I Brand New, Product # 000-10346-001 The Lowrance 000-10346-001 adapter kit allows you to hook up your HDS-5 to a Lowrance PPP-17 or PPP-18I Portable Power Pack. It includes a HDS-5 gimbal bracket, gimbal knobs, transducer adapter cable and power cord adapter cable. 000-10346-001 Features: Adapter Kit, For PPP-17 or PPP-18I Portable Power Pack, For Lowrance Models: PPP-17 or PPP-18I Includes: HDS-5 Gimbal Bracket, Gimbal Knobs, Transducer Adapter Cable, Power Cord Adapter Cable" |
|
|
Ram Mount / RAM Mount Humminbird / Lowrance Elite/Mark Series Mount f/ Units Under 5lbs. / RAM-B-107U $36.17 Ram Mount - RAM Mount Humminbird / Lowrance Elite/Mark Series Mount f/ Units Under 5lbs. - RAM-B-107U |
|
|
Ram Mount / RAM Mount Humminbird / Lowrance Elite/Mark Series Mount f/ Units Under 10lbs. / RAM-107U $51.68 Ram Mount - RAM Mount Humminbird / Lowrance Elite/Mark Series Mount f/ Units Under 10lbs. - RAM-107U |
|
|
Lowrance 101-62 Lowrance 1" Ball Mount Bracket $82.95 "Lowrance 1" Ball Mount Bracket, Product # 101-62 The Lowrance 101-62 is a MB-7 R-A-M 1"" ball mount bracket featuring arm and mounting plate, for use with the Lowrance marine equipments. 101-62 Features: Ball Mount Bracket, Arm & Mounting Plate, For Lowrance Models: Accura: 240, Cuda: 168 EX, FishEasy: 2, FishElite: 320, 480, 500C, 502C iGPS, 640C, 642C iGPS, FishMark: 160, 240, 320, 480, 500C, 640C, GlobalMap: 2400, 3200, 3300C, 3500C, 4800, IntelliMap: 320, 480, 500C, 502C iGPS, 642C iGPS, LMS: 240, 320, 330C, 332C, 334C iGPS, 335C DF, 337C DF, 339C DF iGPS, 480, SeaCharter: 320DF, 480DF, 500C DF, 502C DF iGPS, 640C DF, 642C DF iGPS, SeaFinder: 240DF, 320DF, Status, Journey, Trifinder: 2, X100C, X102C, X105C DF, X107C DF, X125, X135, X136DF, X51, X58DF, X-71, X87, X88DF, X-91, X97, X98DF" |


US $15.99
























