Transducer Cables

Transducer Cables

Flawless medical attention offered with biomedical accessories services

Medicine is one of those areas that holds great value for one and all. Time and again, there will be a requirement for you to undergo some or the other medical procedure. With such a complex body and a hectic life that doesn't leave enough time for leisure and relaxation, physical woes are present everywhere. In order to cater to your health problems and surgical needs, a healthcare organization or a hospital has to ensure that it has efficient biomedical instrumentation. You will be able to get the best possible treatment when you have the option of biomedical accessories services on your side.

Instrumentation that is concerned with medicine, surgery or healthcare in general should be maintained well to ensure that accurate treatment is being offered to the needy. The right amount and good quality of oxygen should be delivered and that is why maintenance of the pulse oximeter cables should be done. Other than the oxygen needs, biomedical apparatus used commonly is the foetal ultrasound transducer. These instruments too need to be maintained and assessed from time to time to ensure that they deliver optimal results.

There are many different instruments that are used in quality healthcare practices and they have to be serviced and repaired well. Companies offering biomedical services for various biomedical instruments will be able to protect your life or your health from being jeopardized by faulty biomedical apparatus. With the aid of the right repair and service, you will be able to maintain various equipments like invasive pressure cables. These tools when taken care of with good servicing can ensure that all surgical procedures go very smoothly. Such repair services can offer their services on various medical apparatus like patient monitoring accessories that will be hugely responsible for handling the condition of a patient in need of medical aid.

With the way modern medicine is moving ahead, there are many different kinds of medical paraphernalia that have come around. These instruments are doctor's tools in treating the sick and the needy and they will get immense support with options like a foetal heart transducer repair. By offering services like wall suction regulator repair, these biomedical instrument service and repair professionals will ensure that the surgical and medical procedures are carried out with utmost precision. These specialized services will also be able to cater to your need of obtaining replacement patient cables and products like the EEG electrodes.  

By taking aid of these biomedical accessories services, you will be able to get the sort of servicing and repair that is needed to keep all medical and surgical instruments in shape. Nothing is more important than healthcare and you will be able to get the best services when the biomedical apparatus has been taken care of and maintained in due course of time. In life, taking care of your health is a real important deal and serviced biomedical equipments will ensure nothing compromises your health in any way.

About the Author

Bob Boutaleb is the author of this article on Biomedical Accessories Services. Find more information about Biomedical Services here.

Humminbird Ec 6 Transducer Extension Cable. Each $20.4 Manufacturer: Humminbird. Each. Customers also search for: Discount Ec 6 Transducer Extension Cable, Buy Ec 6 Transducer Extension Cable, Wholesale Ec 6 Transducer Extension Cable, 082324501302, 720006-6, GPS Cables

Garmin 10 Ft Extension Cable For Transducer. Each $33.72 Manufacturer: Garmin. Each. Customers also search for: Discount 10 Ft Extension Cable For Transducer, Buy 10 Ft Extension Cable For Transducer, Wholesale 10 Ft Extension Cable For Transducer, 753759052737, 010-10715-00, GPS Cables

Garmin 20 Ft Extension Cable Transducer. Each $48.37 Manufacturer: Garmin. Each. Customers also search for: Discount 20 Ft Extension Cable Transducer, Buy 20 Ft Extension Cable Transducer, Wholesale 20 Ft Extension Cable Transducer, 753759052720, 010-10716-00, GPS Cables

Raymarine Transducer Extension Cable 3m $126.34 Transducer Extension Cable 3mTransducer extension cable for DS400x DS500x DS600x and DSM25 (A65) fishfinders.3 meter extension cable extends the length of your stock transducer cable for extralong runs on larger vessels. Plugtogether connections for fast and easy installation. Note: For optimum performance Raymarine recommends adding no more than 3 extension cables to any given transducer cable.Product : RAYMARINE E66074 3ME XDUCER EXT F/ DS400/500/600 Manufacturer : RAYMARINE PARTS Manufacturer Part No : E66074 UPC : 723193660744

Humminbird Transducer Extension Cable $45.02 Transducer Extension CableThe Transducer Extension Cables extend the location of transducers up to 50 feet without affecting accuracy or performance. All cable end connectors are gold plated for corrosion resistance.Description: Transducer Extension Cable 10 ft. For Use With: 300TX 400TX Tour Series Wide Eye Wide View Wide Vision Wide 3D View Wide 3D Vision Wide 3D Vista Wide Optic Wide Portrait Wide Panorama Wide Paramount Wide 3D Paramount Matrix 10 Matrix 15 Matrix 17 Matrix 20 Matrix 25 Matrix 27 Matrix 35 Matrix 37 Matrix 55 Matrix 65 Matrix 67 Matrix 97 FF515 FF535 FF565 FF585c FF595c Piranha 1 Piranha 2 Piranha 3 Piranha 4 Piranha 5 PiranhaMax 10 PiranhaMax 15 PiranhaMax 20 323 343c 363 383c 727 737 767 777c 777c2 787c 787c2.Product : HUMMINBIRD ECW10 10FT TRANSDUCER EXTENSION CABLE Manufacturer : HUMMINBIRD PARTS Manufacturer Part No : 7200031 UPC : 082324502682

Transducer $70.1 High Quality Content by WIKIPEDIA articles A transducer is a device that converts one type of energy to another. The conversion can be to/from electrical, electromechanical, electromagnetic, photonic, photovoltaic, or any other form of energy. While the term transducer commonly implies use as a sensor/detector, any device which converts energy can be considered a transducer.Transducers may be categorized by application: Sensor, actuator, or combination.A sensor is used to detect a parameter in one form and report it in another form of energy (usually an electrical and/or digital signal). For example, a pressure sensor might detect pressure (a mechanical form of energy) and convert it to electricity for display at a remote gauge. Author: Surhone, Lambert M./ Timpledon, Miriam T./ Marseken, Susan F. Binding Type: Paperback Number of Pages: 94 Publication Date: 2010/07/22 Language: English Dimensions: 6.00 x 9.02 x 0.23 inches

Humminbird EC-W30 Transducer Extension Cable - 30 $39.99 Transducer Extension Cable 30 ft. Cable The Transducer Extension Cables extend the location of transducers up to 50 feet without affecting accuracy or performance. All cable end connectors are gold plated for corrosion resistance. For Use With: 300TX, 400TX, TOUR SERIES, WIDE EYE, WIDE VIEW, WIDE VISION, WIDE 3D VIEW, WIDE 3D VISION, WIDE 3D VISTA, WIDE OPTIC, WIDE PORTRAIT, WIDE PANORAMA, WIDE PARAMOUNT, WIDE 3D PARAMOUNT, ALL 500 SERIES FISHFINDERS, ALL MATRIX AND ALL PIRANHA PRODUCTS, ALL 500 SERIES, ALL 300 SERIES, ALL 700 SERIES, ALL 900 SERIES.

Humminbird 7200032 ECW30 30apos; Transducer Extension Cable $44.53 Transducer Extension Cable30 ft. cableThe Transducer Extension Cables extend the location of transducers up to 50 feet without affecting accuracy or performance. All cable end connectors are gold plated for corrosion resistance.For Use With: 300TX 400TX TOUR SERIES WIDE EYE WIDE VIEW WIDE VISION WIDE 3D VIEW WIDE 3D VISION WIDE 3D VISTA WIDE OPTIC WIDE PORTRAIT WIDE PANORAMA WIDE PARAMOUNT WIDE 3D PARAMOUNT ALL 500 SERIES FISHFINDERS ALL MATRIX AND ALL PIRANHA PRODUCTS ALL 500 SERIES ALL 300 SERIES ALL 700 SERIES ALL 900 SERIES.Product : HUMMINBIRD ECW30 30FT TRANSDUCER EXTENSION CABLE Manufacturer : HUMMINBIRD PARTS Manufacturer Part No : 7200032 UPC : 082324502699

Medex LogiCal Disposable Pressure Transducer Neonatal Monitoring Kit, 10/Bx $187.96 Features of the Medex LogiCal Disposable Pressure Transducer Neonatal Monitoring Kit: LogiCal® Pressure Transducer provides a new level of simplicity. In a few easy steps, the system is easy to use. Connect the disposable transducer cartridge, gravity prime the set and zero the calibration. You're set up and ready for use! The innovative transducer mounting plate incorporates the pressure sensor. You change out only the disposable cartridge with each new set up, reducing your cost per patient use. The unique cable system combines multiple cables into one, reducing clutter and saving time. Durable LogiCal® Pressure Transducer mounting plates survive the rigor of transport and the demands of the OR and ICU. QA Check provides easy, one touch Quality Assurance that the transducer is functioning properly. After zeroing the system, press the QA Check button for an instant 100 mm/hg increase in the monitor's display.

531s - transducer $625.99 Garmin 531s - Transducer - included transducer - dual-beam

Garmin Usa Inc 0101032700 Transducer 200/50Khz 15/45Deg $110.35 The P79 is a 50/200kHz fishfinder transducer that mounts inside a hull. no hole is needed in the hull. The active element mounts in a small round tank (included) which is epoxied to the hull and filled with antifreeze. This transducer is for use with solid fiberglass hulls only. Cored hulls will impede the signal. This unit cannot measure water temperature. All P79s are now made as a generic mix and match (MM) transducer with a short 2M pigtail ending in an Airmar 5pin connector. Adapter cables connect to the pigtail and terminate in a connector that is specific to a brand of sounder or fishfinder. The total cable length with adapter installed is 10 meters. You can replace the adapter cable at a later time if you change your sounder without having to replace the transducer. This item consists of the MM transducer plus an adapter cable with a Garmin 6pin connector as used on current Garmin fishfinders and sounders. It is sold by Garmin as part 0101032700. Inhull unit with plastic housing. Frequency 50/200 kHz. Beam cone 45 deg at 50 kHz 12 deg at 200 kHz. Maximum depth range 8001200 ft at 50 kHz 400700 ft at 200kHz. RMS power 600W. Adjusts to hull deadrise angles of 2 deg to 22 deg. Tank should be epoxied to hull. Tank should be filled with nontoxic antifreeze (propylene glycol). Do not use mineral oil. Transducer screws into top of tank as shown. Can be used in aluminum hulls under 0.38mm thick (0.150 ). Can be used in RIBs. Can be used in sailboats with solid glass hulls. MM version can be adapted to any brand of sounder.

Humminbird EC-W10 Transducer Extension Cable - 10 $34.99 Transducer Extension Cable The Transducer Extension Cables extend the location of transducers up to 50 feet without affecting accuracy or performance. All cable end connectors are gold plated for corrosion resistance. Description: Transducer Extension Cable, 10 ft. For Use With: 300TX, 400TX, Tour Series, Wide Eye, Wide View, Wide Vision, Wide 3D View, Wide 3D Vision, Wide 3D Vista, Wide Optic, Wide Portrait, Wide Panorama, Wide Paramount, Wide 3D Paramount, Matrix 10, Matrix 15, Matrix 17, Matrix 20, Matrix 25, Matrix 27, Matrix 35, Matrix 37, Matrix 55, Matrix 65, Matrix 67, Matrix 97, FF515, FF535, FF565, FF585c, FF595c, Piranha 1, Piranha 2, Piranha 3, Piranha 4, Piranha 5, PiranhaMax 10, PiranhaMax 15, PiranhaMax 20, 323, 343c, 363, 383c, 727, 737, 767, 777c, 777c2, 787c, 787c2.

Clipper Wind Instrument W/Masthead Transducer Cover $515.46 The Clipper Wind system shares the same 110mm square case as its sister instruments in the Clipper range. the display is exceptionally large and clear with 60 segments for full 360 degree direction indication. Windspeed is shown in knots M.P.H. or Metres/second. The pointer style is selectable from the single segment shown above to multi segments for greater clarity or a windex style indicator. The Masthead unit is well proven and supplied with 20 metres of cable as standard.Technical Specifications:. Supply voltage Nominal 12v DC. Consumption 50mA+ (25mA for display illumination max). Keypad adjustment of masthead alignment. 7 levels of display backlighting. Display case size 110 x 110 mm. Depth behind panel 30mm. Anemometer head 210 x 140mm. 5 and 20 metre extension cables available. Compatible with Standard Horizon CP180 and CP300 plotters. Product : CLIPPER WIND INSTRUMENT WITH MASTHEAD TRANSDUCER COVER. Manufacturer : CLIPPER. Manufacturer Part No : CLW

Dean Markley Artist Transducer $32.95 Dean Markley Artist Transducer

Garmin (010-10327-00) Transducer 0101032700 $87.15 Garmin (010-10327-00) Transducer 0101032700

Garmin (010-10218-00) Transducer 0101021800 $97.24 Garmin (010-10218-00) Transducer 0101021800

Transducer, 200/50khz 15/45deg, $74.99 TRANSDUCER, 200/50KHZ 15/45DEG,

Transducer, Shs 7w $69.99 TRANSDUCER, SHS 7W

GARMIN 200/50KHZ 12/45DEG PLASTIC ADJ. INHULL MOUNT TRANSDUCER $110.35 The P79 is a 50/200kHz fishfinder transducer that mounts inside a hull no hole is needed in the hull. The active element mounts in a small round tank (included) which is epoxied to the hull and filled with antifreeze. This transducer is for use with solid fiberglass hulls only. Cored hulls will impede the signal. This unit cannot measure water temperature. All P79s are now made as a generic mix and match (MM) transducer with a short 2M pigtail ending in an Airmar 5pin connector. Adapter cables connect to the pigtail and terminate in a connector that is specific to a brand of sounder or fishfinder. The total cable length with adapter installed is 10 meters. You can replace the adapter cable at a later time if you change your sounder without having to replace the transducer. Inhull unit with plastic housing. Frequency 50/200 kHz. Beam cone 45 deg at 50 kHz 12 deg at 200 kHz. Maximum depth range 8001200 ft at 50 kHz 400700 ft at 200kHz. RMS power 600W. Adjusts to hull deadrise angles of 2 deg to 22 deg. Tank should be epoxied to hull. Tank should be filled with nontoxic antifreeze (propylene glycol). Do not use mineral oil. Transducer screws into top of tank as shown. Can be used in aluminum hulls under 0.38mm thick (0.150 ). Can be used in RIBs. Can be used in sailboats with solid glass hulls. MM version can be adapted to any brand of sounder.

BD DTXPlus DT-4812R Latex Free Sterile Disposable Transducer Kit for Pole-Mount Application, 10/ $208 Kit includes transducer with built-in flush device and zeroing stopcock with BD EasyVent™ deadender, BD R.O.S.E.™ damping device, 48 in pressure tubing, 3-way stopcock, 12 in. pressure tubing and 60 in. 60 drop/cc microdrip administration set with 15 micron filter screen.Complete kits come with vented covers on unused fittings, a package of non-vented caps and a label set. All BD DTXPlus™ disposable transducers are designed for use with BD™ transducer interface cables and mounting plates ordered separately.Key Product Features:Product type: Disposable pressure transducer Brand BD DTXPlus™, BD EasyVent™, BD R.O.S.E.™ Administration set Single 60 in. microdrip ad set with 15 micron filter screen, 60 drops/cc.Cable required Reusable pressure transducer interface cable is needed to connect transducer to pressure monitor.Component length 60 in. pressure tubing.Latex Free.Flow rate Nominal flow rate of 3 cc/hour when infusion bag is pressurized to 300 mmHg.Integrated flow - flush Yes.Pressure range Pressure range of -30 to +300 mmHg Over-pressure tolerance: 10000 mmHg.Sterile.

Clipper Wind Instrument W/Masthead Transducer And Cover $459.95 The Clipper Wind system shares the same 110mm square case as its sister instruments in the Clipper range. The display is exceptionally large and clear, with 60 segments for full 360 degree direction indication. Windspeed is shown in knots, M. P. H. Or Metres/second. The pointer style is selectable, from the single segment shown above, to multi segments for greater clarity or a windex style indicator. The Masthead unit is well proven and supplied with 20 metres of cable as standard. Technical Specifications: Supply voltage Nominal 12v DC Consumption, 50mA - 25mA for display illumination max - Keypad adjustment of masthead alignment 7 levels of display backlighting Display case size 110 x 110 mm Depth behind panel 30mm Anemometer head 210 x 140mm 5 and 20 metre extension cables available Compatible with Standard Horizon CP180 and CP300 plotters

Clipper / Clipper In-Hull Transducer Mounting Kit - Transducer Not Included / CLZ-IHK $41.1 Clipper - Clipper In-Hull Transducer Mounting Kit - Transducer Not Included - CLZ-IHK

Transducer for ANG2000 $109.2 Downloads / Documents End User Form (pdf) Use this Transducer to inject acoustic noise into walls, ceilings, windows, plumbing, and air ducts.

Garmin / TRANSDUCER, 200/50KHZ 15/45DEG, / 010-10327-0 $84 Garmin - TRANSDUCER, 200/50KHZ 15/45DEG, - 010-10327-0

Hummingbird / TRANSDUCER, SHS 7W / 7100021 $90.29 Hummingbird - TRANSDUCER, SHS 7W - 7100021

ButtKicker Advance Audio Transducer (4Ohm) $149.99 ButtKicker Advance Audio Transducer (4Ohm)

The Realist Acoustic Violin Transducer Violin $200 The Realist Acoustic Violin Transducer Violin

The Realist Viola Transducer Mini Plug $200 The Realist Viola Transducer Mini Plug

The Realist Cello Transducer 1/4 In Plug $196 The Realist Cello Transducer 1/4 In Plug

Buttkicker Advance Audio Transducer (4Ohm) $149.99 ButtKicker Advance Audio Transducer (4Ohm)

Garmin Transducer 200/50KHZ 15/45DEG 010103270 $85.12 Garmin Transducer 200/50KHZ 15/45DEG 010103270

Lowrance Corporation In-Hull Transducer 13603 $125.53 Lowrance Corporation In-Hull Transducer 13603

Humminbird 900 Series - transducer $133.99 TRANSDUCER, XBTH 9 QB 90 T, QUAD/TRI

Garmin Depth and Temperature Transducer $56.99 010-10249-00 1 Year Limited 20 200 kHz 20° Depth and Temperature Transducer Garmin Garmin, Ltd Plastic Transducer Transom www.garmin.com

Humminbird 900 Series Optional Bronze thru-hull 3-in-1 Transducer - transducer $220.99 TRANSDUCER, XTD 9 QB 90, QUAD/TRI

Respironics Nasal Pressure Transducer for use with Stardust $564.2 Nasal Pressure Transducer for use with Stardust.

Humminbird MHX XMK - transducer mounting hardware $21.99 MHX XMK, KAYAK TRANSDUCER INSTALL